We can manufacture made-to-measure replacement scraper blades for you to clear snow, water, sand and bulk materials.

• Guarantees clean snow clearance whilst protecting the road surface
• Impressively high elasticity across the entire hardness range
• High wear resistance
• Noise reduction
• Weather-, oil- and grease-resistant
• Good resistance to ozone, UV and high-energy radiation
• Good mechanical and dynamic load-bearing capacity
• Free from plasticisers

The strips, made from high-quality, durable polyurethane, are available in thicknesses ranging from 6 to 50 mm.
On request, one or both edges can be bevelled at a 45° angle.

The skirting boards are supplied without pre-drilled holes as standard. They can easily be drilled using a standard drill.
On request, we can also supply pre-drilled strips with round or slotted holes. Please note that the hole must be approx. 2 mm larger than the screw.

You will find some examples on this page. To request a scraper strip with your desired dimensions, please use the express enquiry form.