Wireless Forkcamera Set

Tine camera radio set incl. monitor
The complete tine camera package incl. camera, monitor and battery-operated radio transmitter

When working in high-bay warehouses, one of the greatest difficulties is placing the tines precisely under the pallet, as the driver can only control his work from an extremely low viewpoint. Damage to the goods and even dangerous accidents can result if the load is not picked up correctly.
Our tine camera provides a remedy. The camera in the slim, robust stainless steel housing is attached to the inside of the fork and gives the driver a clear view of the working area of the lifting fork, even in unfavourable lighting conditions thanks to the integrated infrared night vision diodes
The ‘tine camera’ has the greatest effect when used on duplex and triplex masts.
The transmission of the image signal with our radio system is ideal. Easy to operate and with a long battery life.
Data transmission is encrypted and the transmitter is supplied with power wirelessly.
The 3-channel monitor enables the connection of two additional vehicle cameras from our system and can be controlled in many ways via trigger voltages.


Technical Data - Tine Camera
Sensor type: 1/4’ Sony colour CCD sensor
Resolution: 420 TVL. NTSC: 510(H)x492(V)
Lens: 3.7 mm

Supply voltage: 12 V ± 10 %
Power consumption: ≤ 2.5 W
Aperture angle: approx. 55° horizontal
Night vision: 4 IR diodes

Operating temperature: - 30 °C to +70 °C
Dimensions: 300(L) x 25.4(H) x 25.4(D) mm
Protection class: IP68, salt water resistant
Shock-tested: 10 G

Technical Data - Transmitter incl. Battery Pack
Input voltage: 5.0V, 2 A
Output voltage: 12V DC
Maximum charging current: 12 V; 2.5 A
Battery capacity: 12000 mAh (4 x 3400 mAh, 18650 AAA battery)
Maximum working time: 9 h
Charging time: 7 h
Impermeability class: IP65
Power consumption: ≤52.5 W

Working temperature: -20° C to +70° C
Storage temperature: -30° C to +80° C
Dimensions: 155 (L) x 125 (W) x 44 (H) mm
Synchronisation: Video and audio
Available frequency ranges: 24 different groups
AV connection: For camera

Technical Data - Receiver
Frequency range; 2.4 GHz
Range with unobstructed view: ≤100 m
Maximum start time: 2 sec
Delay: < 200 ms
Video code: MPEG4
Audio code: MP3, 1 channel
Frame rate: NTSC: 30 f/s; PAL: 25 f/s
Input voltage: t 12/24 V
Power consumption: ≤2 W
Tightness class: IP65
Operating temperature: -20 °C to +70 °C
Storage temperature: -30 °C to +80 °C
Dimensions: 104 (L) x 80 (W) x 30 (H) mm
Weight: 200 ±10 g

Technical Data - Monitor
Screen diagonal: 7.0’ (~18 cm)
Resolution: 1024 x (RGB) 600 pixels, 16:9
Viewing angle: U/70°, O/75°, R/75° , L/75°
Luminosity / contrast: 500 cd/m² | 1:1000
Image control: Light sensor on the front for image brightness and button illumination
Speaker: Integrated
Voltage: DC input: 12-24 V
Power consumption: < 7.0 W
Operating temperature: -30 °C to +85 °C
Dimensions (monitor only): 181 (W) x 122 (H) x 24 (D) mm
Weight: 480 g


Scope of delivery
1x prong camera
1x mounting screws for camera
1x data sheet & operating instructions for camera
1x radio transmitter for battery operation
1x radio receiver
1x battery pack with integrated USB charger
1x mains adapter
1x Charging cable Installation material for radio transmission set
1x Data sheet & operating instructions for radio transmission set
1x monitor
1x connection cable
1x monitor holder
1x data sheet & instruction manual for monitor